Do you have a room that could utilize a ceiling fan to cool it down Its not really complicated to install a ceiling fan by yourself if you are considering to replace a light fixture. All of the wires you need is already there so the only thing is to change the current workbox with one that is developed for the weight of a ceiling fan. Hanging your brand new ceiling fan on an established box that won't support the added weight of the fan could result in disaster. Just before you perform anything, read the guidelines for your fan very thoroughly and make sure you have the needed tools.

If you plan to setup the fan at a cathedral type ceiling, you very well may need to get parts to prolong the fan lower. Once you are ready for the actual installation, be sure that the breaker is turned off, so no power is delivering to the light you are swapping. woodworking plans After taking off the current light fixture, verify to see if the installed workbox can handle the weight of your ceiling fan. Nearly all workboxes are not aimed for ceiling fans, you will need added support. You can do this quite easily if you are able to get the light fixture from the attic.

To increase support, you merely nail a 2x4 between the ceiling rafters in order that it touches the top of the workbox. Make sure the 2x4 is secured in its place, and then attach the box to the wood. If you did it accurately, the excess weight of the fan must be effectively supported by the 2x4 wood and screws woodworking plans. If you are incapable to do it from the attic or you have simply no attic, you will have to include a cross bracing in your ceiling. Doing this is far more of a challenge and may not be as reliable as using a 2x4 but it is the most suitable you can do if you dont get access to the attic.

After you have gathered the fan carefully, you are now in a position to hang your fan. The difficult part is joining the wiring while holding the fan. The challenge is based on the kind of fan you get, whether it is a clinging frame or a fan that has a bracket with a J hook. Majority of fans employ a chain to master the speed of the fan when the wall switch turns the product on or off. If you choose to also mount a light kit with the fan, both can be operated by either chain or wall switch.

The next step is to follow the wiring details which are as simple as hooking up two white wires, two black wires and two ground wires woodworking plans. Now all you will need to do is finish assembling the fan according to the directions, by connecting the fan blades. Immediately after you install the blades, the only thing left is to flip the breaker back on to see if you did it right.